Oil Change Procedure - Revision history

Bokonon: /* The process */

2011-10-10T13:34:51Z

The process

← Older revision		Revision as of 09:34, 10 October 2011
Line 48:		Line 48:
	Here is a diagram of the filter assembly.		Here is a diagram of the filter assembly.

	[[Image:OIL_PUMP_OIL_FILTER-2.png\|~~70px~~]]		[[Image:OIL_PUMP_OIL_FILTER-2.png\|100px]]

	Make sure the drain plug washer is installed on the drain plug and tighten the drain plug to 14.5 ft/lbs (the same as the filter bolt). Use a new drain plug washer (92065-097 GASKET, 12X22X2). Many people don't replace these every time, but they're cheap. Stock up. When you reuse the crush washer, you run the risk of oil seeping out around the already compressed (old) crush washer. Why skimp on a $0.33 part (92065-097 from [http://ronayers.com/ ronayers.com])? Two alternatives are Hyundai part #21513-23001 or Nissan #11026-01M02.		Make sure the drain plug washer is installed on the drain plug and tighten the drain plug to 14.5 ft/lbs (the same as the filter bolt). Use a new drain plug washer (92065-097 GASKET, 12X22X2). Many people don't replace these every time, but they're cheap. Stock up. When you reuse the crush washer, you run the risk of oil seeping out around the already compressed (old) crush washer. Why skimp on a $0.33 part (92065-097 from [http://ronayers.com/ ronayers.com])? Two alternatives are Hyundai part #21513-23001 or Nissan #11026-01M02.

Bokonon: /* The process */

2011-10-10T13:30:34Z

The process

← Older revision		Revision as of 09:30, 10 October 2011
Line 48:		Line 48:
	Here is a diagram of the filter assembly.		Here is a diagram of the filter assembly.

	[[Image:~~oil filter assembly~~.~~jpg~~\|70px]]		[[Image:OIL_PUMP_OIL_FILTER-2.png\|70px]]

	Make sure the drain plug washer is installed on the drain plug and tighten the drain plug to 14.5 ft/lbs (the same as the filter bolt). Use a new drain plug washer (92065-097 GASKET, 12X22X2). Many people don't replace these every time, but they're cheap. Stock up. When you reuse the crush washer, you run the risk of oil seeping out around the already compressed (old) crush washer. Why skimp on a $0.33 part (92065-097 from [http://ronayers.com/ ronayers.com])? Two alternatives are Hyundai part #21513-23001 or Nissan #11026-01M02.		Make sure the drain plug washer is installed on the drain plug and tighten the drain plug to 14.5 ft/lbs (the same as the filter bolt). Use a new drain plug washer (92065-097 GASKET, 12X22X2). Many people don't replace these every time, but they're cheap. Stock up. When you reuse the crush washer, you run the risk of oil seeping out around the already compressed (old) crush washer. Why skimp on a $0.33 part (92065-097 from [http://ronayers.com/ ronayers.com])? Two alternatives are Hyundai part #21513-23001 or Nissan #11026-01M02.

Bokonon: /* Stuff you need */

2011-10-10T11:13:03Z

Stuff you need

← Older revision		Revision as of 07:13, 10 October 2011
Line 2:		Line 2:
	====Stuff you need====		====Stuff you need====

	Once you decide to change the oil in your bike, the process is not that difficult. First, gather together the needed supplies. You'll need 2 quarts of [[Preferred Brands\|oil]], a [[Oil Filters\| filter]] and a drain pan. You should also have a new drain plug washer (part number 92065-097).		Once you decide to change the oil in your bike, the process is not that difficult. First, gather together the needed supplies. You'll need 2 quarts of [[Preferred Brands\|oil]], a [[Oil Filters\| filter]] and a drain pan. You should also have a new drain plug washer (part number 92065-097). This is a very common part, fitting dozens of Kawasaki motorcycles. Your dealer ''should'' have some around.

	One other thing that you will have to have before you start changing the oil is a [http://faq.ninja250.org/wiki/What_should_a_good_set_of_tools_include%3F#Misc torque wrench]. '''This is mandatory.''' Learn how to use it before you change your oil for the first time. Don't practice on your drain plug.		One other thing that you will have to have before you start changing the oil is a [http://faq.ninja250.org/wiki/What_should_a_good_set_of_tools_include%3F#Misc torque wrench]. '''This is mandatory.''' Learn how to use it before you change your oil for the first time. Don't practice on your drain plug.

Bokonon: /* The process */

2011-10-10T08:11:35Z

The process

← Older revision		Revision as of 04:11, 10 October 2011
Line 50:		Line 50:
	[[Image:oil filter assembly.jpg\|70px]]		[[Image:oil filter assembly.jpg\|70px]]

	Make sure the drain plug washer is installed on the drain plug and tighten the drain plug to 14.5 ft/lbs (the same as the filter bolt). Use a new drain plug ~~gasket~~ (92065-097 GASKET, 12X22X2). Many people don't replace these every time, but they're cheap. Stock up. When you reuse the crush washer, you run the risk of oil seeping out around the already compressed crush washer. Why skimp on a $0.33 part (92065-097 from [http://ronayers.com/ ronayers.com])? Two alternatives are Hyundai part #21513-23001 or Nissan #11026-01M02.		Make sure the drain plug washer is installed on the drain plug and tighten the drain plug to 14.5 ft/lbs (the same as the filter bolt). Use a new drain plug washer (92065-097 GASKET, 12X22X2). Many people don't replace these every time, but they're cheap. Stock up. When you reuse the crush washer, you run the risk of oil seeping out around the already compressed (old) crush washer. Why skimp on a $0.33 part (92065-097 from [http://ronayers.com/ ronayers.com])? Two alternatives are Hyundai part #21513-23001 or Nissan #11026-01M02.

	[[Image:9Winterize.jpg\|110px]]		[[Image:9Winterize.jpg\|110px]]

Bokonon: /* Stuff you need */

2011-10-10T08:02:08Z

Stuff you need

← Older revision		Revision as of 04:02, 10 October 2011
Line 2:		Line 2:
	====Stuff you need====		====Stuff you need====

	Once you decide to change the oil in your bike, the process is not that difficult. First, gather together the needed supplies. You'll need 2 quarts of [[Preferred Brands oil]], a [[Oil Filters\| filter]] and a drain pan. You should also have a new drain plug washer (part number 92065-097).		Once you decide to change the oil in your bike, the process is not that difficult. First, gather together the needed supplies. You'll need 2 quarts of [[Preferred Brands\|oil]], a [[Oil Filters\| filter]] and a drain pan. You should also have a new drain plug washer (part number 92065-097).

	One other thing that you will have to have before you start changing the oil is a [http://faq.ninja250.org/wiki/What_should_a_good_set_of_tools_include%3F#Misc torque wrench]. '''This is mandatory.''' Learn how to use it before you change your oil for the first time. Don't practice on your drain plug.		One other thing that you will have to have before you start changing the oil is a [http://faq.ninja250.org/wiki/What_should_a_good_set_of_tools_include%3F#Misc torque wrench]. '''This is mandatory.''' Learn how to use it before you change your oil for the first time. Don't practice on your drain plug.

Bokonon: /* Stuff you need */

2011-10-10T08:01:36Z

Stuff you need

← Older revision		Revision as of 04:01, 10 October 2011
Line 2:		Line 2:
	====Stuff you need====		====Stuff you need====

	Once you decide to change the oil in your bike, the process is not that difficult. First, gather together the needed supplies. You'll need oil, [[Oil Filters\|a filter]] and a drain pan. You should also have a new drain plug washer (part number 92065-097). The silicone spray lube is for the cables, and any other external moving parts, such as the foot pegs, levers, etc. Also shown in this photo are chain lube (you should always have some around) and fuel stabilizer, since these pictures were originally taken for a [[How should I go about preparing my bike for winter storage?\|winterization article]].		Once you decide to change the oil in your bike, the process is not that difficult. First, gather together the needed supplies. You'll need 2 quarts of [[Preferred Brands oil]], a [[Oil Filters\| filter]] and a drain pan. You should also have a new drain plug washer (part number 92065-097).

	~~[[Image:1Winterize.jpg\|110px]]~~

	One other thing that you will have to have before you start changing the oil is a [http://faq.ninja250.org/wiki/What_should_a_good_set_of_tools_include%3F#Misc torque wrench]. '''This is mandatory.''' Learn how to use it before you change your oil for the first time. Don't practice on your drain plug.		One other thing that you will have to have before you start changing the oil is a [http://faq.ninja250.org/wiki/What_should_a_good_set_of_tools_include%3F#Misc torque wrench]. '''This is mandatory.''' Learn how to use it before you change your oil for the first time. Don't practice on your drain plug.

Bokonon at 07:46, 10 October 2011

2011-10-10T07:46:07Z

← Older revision		Revision as of 03:46, 10 October 2011
Line 2:		Line 2:
	====Stuff you need====		====Stuff you need====

	Once you decide to change the oil in your bike, the process is not that difficult. First, gather together the needed supplies. You'll need oil, [[Oil Filters\|a filter]] and a drain pan. The silicone spray lube is for the cables, and any other external moving parts, such as the foot pegs, levers, etc. Also shown in this photo are chain lube (you should always have some around) and fuel stabilizer, since these pictures were originally taken for a [[How should I go about preparing my bike for winter storage?\|winterization article]].		Once you decide to change the oil in your bike, the process is not that difficult. First, gather together the needed supplies. You'll need oil, [[Oil Filters\|a filter]] and a drain pan. You should also have a new drain plug washer (part number 92065-097). The silicone spray lube is for the cables, and any other external moving parts, such as the foot pegs, levers, etc. Also shown in this photo are chain lube (you should always have some around) and fuel stabilizer, since these pictures were originally taken for a [[How should I go about preparing my bike for winter storage?\|winterization article]].

	[[Image:1Winterize.jpg\|110px]]		[[Image:1Winterize.jpg\|110px]]

Bokonon: /* The process */

2010-07-22T00:57:22Z

The process

← Older revision		Revision as of 20:57, 21 July 2010
Line 10:		Line 10:
	====The process====		====The process====

	Warm up the engine [[Warming up your engine\|by riding it]]. Turn off the engine and let it sit for a couple minutes. Place the bike on the centerstand. Removing the lower fairing is optional. Some people prefer to do it because it's quick, gives you a bit more room in which to work, and minimizes mess; others think it's not worth the effort, so it's up to you; it's held on by 7 bolts.		Warm up the engine by [[Warming up your engine\|riding it]]. Turn off the engine and let it sit for a couple minutes. Place the bike on the centerstand. Removing the lower fairing is optional. Some people prefer to do it because it's quick, gives you a bit more room in which to work, and minimizes mess; others think it's not worth the effort, so it's up to you; it's held on by 7 bolts.

	First, remove the drain plug and drain the oil into a suitable 3+ quart pan (don't burn yourself). Removing the oil filler cap will help the oil drain faster. Let the oil drain until it's obvious that no more is going to come out. This will usually be 5+ minutes.		First, remove the drain plug and drain the oil into a suitable 3+ quart pan (don't burn yourself). Removing the oil filler cap will help the oil drain faster. Let the oil drain until it's obvious that no more is going to come out. This will usually be 5+ minutes.

Bokonon: /* The process */

2010-07-22T00:56:55Z

The process

← Older revision		Revision as of 20:56, 21 July 2010
Line 66:		Line 66:
	[[Image:11Winterize.jpg\|110px]]		[[Image:11Winterize.jpg\|110px]]

	Make sure you check for leaks, and [[How do I check my oil?\|check your oil level]] frequently.		Make sure you check for leaks, and [[How do I check my oil?\|check your oil level]] frequently. Ride it for a few minutes and check for leaks again. Make sure there is no oil leaking from around the filter assembly or drain plug.

	====Notes====		====Notes====

Bokonon: /* The process */

2010-07-22T00:48:07Z

The process

← Older revision		Revision as of 20:48, 21 July 2010
Line 10:		Line 10:
	====The process====		====The process====

	Warm up the engine [[Warming up your engine\|by riding it]. Turn off the engine and let it sit for a couple minutes. Place the bike on the centerstand. Removing the lower fairing is optional. Some people prefer to do it because it's quick, gives you a bit more room in which to work, and minimizes mess; others think it's not worth the effort, so it's up to you; it's held on by 7 bolts.		Warm up the engine [[Warming up your engine\|by riding it]]. Turn off the engine and let it sit for a couple minutes. Place the bike on the centerstand. Removing the lower fairing is optional. Some people prefer to do it because it's quick, gives you a bit more room in which to work, and minimizes mess; others think it's not worth the effort, so it's up to you; it's held on by 7 bolts.

	First, remove the drain plug and drain the oil into a suitable 3+ quart pan (don't burn yourself). Removing the oil filler cap will help the oil drain faster. Let the oil drain until it's obvious that no more is going to come out. This will usually be 5+ minutes.		First, remove the drain plug and drain the oil into a suitable 3+ quart pan (don't burn yourself). Removing the oil filler cap will help the oil drain faster. Let the oil drain until it's obvious that no more is going to come out. This will usually be 5+ minutes.