I want to get some new pegs: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 2:

[[Category:Bodywork & Frame]]

Several companies offer replacement pegs for your sport motorcycle. Performance pegs will be very different in appearance and materials than OEM pegs. ProTek, Gilles Tooling, Competition Werkes, Superpole, Emgo and Vortex all make one of two basic styles of performance enhancing footpegs: round and slash cut. While similar in function (both strive to increase grip on your boot, and increase lean angle by removing unnecessary material), they are still different and will feel different to you, the rider.

We definitely '''do not recommend''' slash cut pegs. They're unsafe.

Round pegs are machined from a piece of round billet aluminum. They are generally a little shorter (1/2" per peg, approximately) and hence are less likely to scrape during extreme lean angle. The surface is a knurled finish, uniform all around the peg, and, like the slash cut pegs, can be found in a variety of colors.

Line 18:

Line 20:

Changing pegs is easy. Remove the clip holding the pin that holds your pegs in place, then slide the pin out. The spring may want to go flying, so make sure you track it down. Put the spring in the new peg in the same way that it was in the old peg, slide the peg into the footpeg bracket, and slide the pin through the holes to hold it. Re-attach the clip (on some models it may be a cotter pin) to secure it. Repeat on the other side.

If you want to go whole hog, you can get [[Woodcraft rearsets shifter adjustability fix|Woodcraft rearsets]], which will move the pegs up and back, for that racer look and feel (for better or worse).

@@ Line 2: / Line 2: @@
 [[Category:Bodywork & Frame]]
 Several companies offer replacement pegs for your sport motorcycle. Performance pegs will be very different in appearance and materials than OEM pegs. ProTek, Gilles Tooling, Competition Werkes, Superpole, Emgo and Vortex all make one of two basic styles of performance enhancing footpegs: round and slash cut. While similar in function (both strive to increase grip on your boot, and increase lean angle by removing unnecessary material), they are still different and will feel different to you, the rider.
+We definitely '''do not recommend''' slash cut pegs. They're unsafe.
 Round pegs are machined from a piece of round billet aluminum. They are generally a little shorter (1/2" per peg, approximately) and hence are less likely to scrape during extreme lean angle. The surface is a knurled finish, uniform all around the peg, and, like the slash cut pegs, can be found in a variety of colors.
@@ Line 18: / Line 20: @@
 Changing pegs is easy. Remove the clip holding the pin that holds your pegs in place, then slide the pin out. The spring may want to go flying, so make sure you track it down. Put the spring in the new peg in the same way that it was in the old peg, slide the peg into the footpeg bracket, and slide the pin through the holes to hold it. Re-attach the clip (on some models it may be a cotter pin) to secure it. Repeat on the other side.
+If you want to go whole hog, you can get [[Woodcraft rearsets shifter adjustability fix|Woodcraft rearsets]], which will move the pegs up and back, for that racer look and feel (for better or worse).