|
|
| Line 1: |
Line 1: |
| | [[Category:Controls & Cables]] | | [[Category:Controls & Cables]] |
| | + | |
| | + | Several of our experienced riders have stated that the Ninja 250 really doesn't have much of a vibration problem, compared to some other bikes. But you wouldn't be reading this if you agreed. If you haven't been riding for long, try wait-and-see. Things might not seem so bad in a couple weeks or so. |
| | + | |
| | + | One of the first things you should do is check your [[Checking engine mount bolts|motor mount bolts]]. If those are loose, the bike will give noticeably more vibration. It's also a safety issue. |
| | + | |
| | + | A common cause of perceived vibration in the handlebars is the so-called "death grip". You shouldn't be holding onto your bike for dear life; practice being [[Staying light on the bars|light on the bars]]. |
| | + | |
| | + | After you've tried the above stuff, if you still have an unacceptable amount of vibration, here are some things you can try: |
| | + | |
| | + | *Lead: Fill your bars with lead, which could be BB shot used for shotguns or sinkers used for fishing. |
| | + | *Bar ends: Try using heavier [http://faq.ninja250.org/wiki/Removing_%26_replacing_bar_ends#A_couple_things_to_think_about bar ends]. |
| | + | *Stock footpegs: The stock pegs, with rubber under the foot, are usually less prone to letting vibration pass than are aftermarket all-metal replacements. If you've switched to aluminum pegs, switch back. |
| | + | *Gel grips: May help somewhat. Give better feedback and control of the bars than the thicker foam grips. |
| | + | *Foam grips: One option is [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=GPSMALL&Category_Code=grips Grip Puppies], which are foam pads that slip over standard grips. There are also lots of brands of foam grips; these are from [http://www.bikemaster.com/bmstrv2.nsf/home?openform bikemaster]: |
| | + | |
| | + | [[image:foam grips.jpg|150px]] |
| | + | |
| | + | Look on eBay, at a shop, or online. Advantages and disadvantages: |
| | + | |
| | + | '''Pro''' |
| | + | |
| | + | *They increase diameter somewhat, which some people find advantageous for long distance riding, as less grip effort is required to maintain throttle. |
| | + | |
| | + | *They're well-padded, which is the reason for buying them. |
| | + | |
| | + | '''Con''' |
| | + | |
| | + | *They increase diameter somewhat, which some people find causes hand pain. |
| | + | *They have less resistance to weathering. |
| | + | *They hold water like a sponge. |
| | + | |
| | + | You probably only want foam grips if you commute or tour exclusively. The extra squishiness doesn't relay a lot of feedback for sport riding. |
Revision as of 04:44, 25 January 2012
Several of our experienced riders have stated that the Ninja 250 really doesn't have much of a vibration problem, compared to some other bikes. But you wouldn't be reading this if you agreed. If you haven't been riding for long, try wait-and-see. Things might not seem so bad in a couple weeks or so.
One of the first things you should do is check your motor mount bolts. If those are loose, the bike will give noticeably more vibration. It's also a safety issue.
A common cause of perceived vibration in the handlebars is the so-called "death grip". You shouldn't be holding onto your bike for dear life; practice being light on the bars.
After you've tried the above stuff, if you still have an unacceptable amount of vibration, here are some things you can try:
- Lead: Fill your bars with lead, which could be BB shot used for shotguns or sinkers used for fishing.
- Bar ends: Try using heavier bar ends.
- Stock footpegs: The stock pegs, with rubber under the foot, are usually less prone to letting vibration pass than are aftermarket all-metal replacements. If you've switched to aluminum pegs, switch back.
- Gel grips: May help somewhat. Give better feedback and control of the bars than the thicker foam grips.
- Foam grips: One option is Grip Puppies, which are foam pads that slip over standard grips. There are also lots of brands of foam grips; these are from bikemaster:
Look on eBay, at a shop, or online. Advantages and disadvantages:
Pro
- They increase diameter somewhat, which some people find advantageous for long distance riding, as less grip effort is required to maintain throttle.
- They're well-padded, which is the reason for buying them.
Con
- They increase diameter somewhat, which some people find causes hand pain.
- They have less resistance to weathering.
- They hold water like a sponge.
You probably only want foam grips if you commute or tour exclusively. The extra squishiness doesn't relay a lot of feedback for sport riding.
