Difference between revisions of "I want a new windscreen"
Revision as of 14:17, 17 May 2008What windscreen models are available?Two board members make custom windscreens. Both have very good feedback from board members. Duke makes a 16" tall Touring shield. He also has a smaller Sport model. Unfortunately, he also has a full-time job and has been unable to meet all requests in recent months. Please email him to see if he can make one for you. Mike has three models available, from 13.5" to 18" tall. This is also a hands-on, in-his-spare-time operation, so write ahead of time for availability. ZG makes two models that fit the 250, their stock replacement model and the Double Bubble. Both come in a wide range of colors. Below is a comparison of the Double Bubble and OEM screens.
Modifications to the Honda NSS250 windshield, in blk95's own words: "I had to cut off four original mounting tabs of plastic with a Dremel tool. It then fit right on the fairing, and with a little pressure I could mark where to drill the holes for the mounting screws. I used rubber well nuts. Interestingly, there are already two cutouts in the shield that the levers fit into when you turn hard left or right."
How do I properly attach the windscreen to avoid breakage?It is important to put bolts in the center two holes first (loosely), then the two holes beside those, etc, until you've worked your way around the screen. Do not use any type of wrench; hand tighten only. Gradually tighten the centermost bolts a bit, then the next outer pair, and the next, until each pair of bolts is snug but not tight; the screen needs some slack to flex. If you tighten the bolts too quickly, in the wrong order, or too tightly, you risk cracking the screen. | |||||
