Checking engine mount bolts: Difference between revisions
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
The rear two bolts both have nuts on them. The nuts are located on the right side of the bike. | The rear two bolts both have nuts on them. The nuts are located on the right side of the bike. | ||
[[image:IMG_5011.jpg| | [[image:IMG_5011.jpg|100px]] | ||
[[image:IMG_5013.jpg|150px]] | [[image:IMG_5013.jpg|150px]] | ||
[[image:IMG_5014.jpg| | [[image:IMG_5014.jpg|100px]] | ||
If the bolt is not tightening, you may need another socket to hold the other end which, conveniently enough, is on the left side. | If the bolt is not tightening, you may need another socket to hold the other end which, conveniently enough, is on the left side. | ||
[[image:IMG_7005.jpg| | [[image:IMG_7005.jpg|100px]] | ||
Top bolt head is on left; bottom on right. | Top bolt head is on left; bottom on right. | ||
[[image:IMG_7012.jpg|150px]] | [[image:IMG_7012.jpg|150px]] | ||
[[image:IMG_7024.jpg| | [[image:IMG_7024.jpg|100px]] | ||
The front bolt does not have a nut; it screws directly into the front bracket. It is accessible from the left front side of the bike. You can fit a 14mm socket into the fairing vent, but you will need a ~6" extension to get a wrench on it. | The front bolt does not have a nut; it screws directly into the front bracket. It is accessible from the left front side of the bike. You can fit a 14mm socket into the fairing vent, but you will need a ~6" extension to get a wrench on it. | ||
[[image:IMG_7022.jpg|150px]] | [[image:IMG_7022.jpg|150px]] | ||