J model oil change: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
The first difference from the standard oil change is using the sidestand, as there is no centerstand on the newer model. If you have a rear stand you can use that, but the crankcase drains just fine while on the sidestand. | The first difference from the standard oil change is using the sidestand, as there is no centerstand on the newer model. If you have a rear stand you can use that, but the crankcase drains just fine while on the sidestand. | ||
The 'old' drain plug is still there | The 'old' drain plug is still there but is now not used. The oil filter assembly is a carry-over from the previous model. | ||
[[image:oil_drain_01-3.jpg|150px]] | [[image:oil_drain_01-3.jpg|150px]] | ||
| Line 32: | Line 32: | ||
[[image:Sight glass-6-2.jpg|150px]] | [[image:Sight glass-6-2.jpg|150px]] | ||
Make sure you check the oil level on a flat surface, with the 250R ''off'' the | Make sure you check the oil level on a flat surface, with the 250R ''off'' the sidestand & fully upright. | ||
Run the engine for a minute or so and check for leaks. Ride it for a few minutes and check for leaks again. Make sure there is no oil leaking from around the filter assembly or drain plug. Check your oil religiously. | Run the engine for a minute or so and check for leaks. Ride it for a few minutes and check for leaks again. Make sure there is no oil leaking from around the filter assembly or drain plug. Check your oil religiously. | ||
You should also [[Checking the oil screen|check the oil screen]] sometime early on in your ownership. | |||