Changing the front reflectors to running lights: Difference between revisions

 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[Category: Electrical & Lighting]]
[[Category: Electrical & Lighting]]
A modification you can do to improve the safety of your bike is the replacement of the front fairing reflectors with genuine running lights. You may have to look a bit, but you should be able to find some marker lights the same size as the original reflectors. The one used in this article (and still available as of May 2012) can be found at some auto parts, boating or big box stores, or online at boating shops (try [http://www.lowcostboatingstore.com/OPTRONICS-MC36AS-CLRNCE-MRKR-SQ-AMBER-STD-MNT_p_17941.html this one].) The unit is made by Optronics, part #MC36AS "Stud mount clearance/marker/reflector". These may be in the towing or boating department of your local store.  
A modification you can do to improve the safety of your bike is the replacement of the front fairing reflectors with genuine running lights. You may have to look a bit, but you should be able to find some marker lights the same size as the original reflectors. The one used in this article (and still available as of May 2012) can be found at some auto parts, boating or big box stores, or online at boating shops. The unit is made by Optronics, part #MC36AS "Stud mount clearance/marker/reflector". These may be in the towing or boating department of your local store.  


Owner review: Recently, I was able to watch a fellow biker take my bike on a trial run. It was night, and was the first time I really got to see these lights perform. I was very, very happy to see how effective they were in adding to the nighttime visibility of the bike. In addition to providing valuable side-lighting, they also were visible from a frontal perspective.
Owner review: Recently, I was able to watch a fellow biker take my bike on a trial run. It was night, and was the first time I really got to see these lights perform. I was very, very happy to see how effective they were in adding to the nighttime visibility of the bike. In addition to providing valuable side-lighting, they also were visible from a frontal perspective.
Line 18: Line 18:


[[image:drl-10.jpg|150px]]
[[image:drl-10.jpg|150px]]
[[Image:Crimp connectors.jpg|100px]]
[[image:heat shrink tubing.jpg|100px]]
[[image:heat shrink.jpg|160px]]
Connectors that are sold with heat shrink already on them are very convenient.
[[image:Heat shrink crimp.jpg|110px]]
[[image:Signal_5 edit.jpg|150px]]
[[image:Signal_7 edit.jpg|80px]]


====Making a ground wire====
====Making a ground wire====