Washers for carb needles: Difference between revisions
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
If you can't find #4 washers, try to get an assortment that is close in dimension. Those with 2.5 - 3mm inside diameter, and not being too much larger than 3/8"/9.5mm outside should be fine. As always, it's better to get a few more than you need, rather than having to keep going back to the store. | If you can't find #4 washers, try to get an assortment that is close in dimension. Those with 2.5 - 3mm inside diameter, and not being too much larger than 3/8"/9.5mm outside should be fine. As always, it's better to get a few more than you need, rather than having to keep going back to the store. | ||
The washers fit on the needles as shown below. This will raise the needles. Note that the washers shown are only for illustrative purposes; the actual ones used are much thinner. | |||
[[image:shim needles.jpg|250px]] | |||