Steering head bearing replacement: Difference between revisions

← Older edit Newer edit →

@@ Line 28: / Line 28: @@
 *
 *
+[:>Bob  I think All Balls calls those "sealed tapered roller bearings"  I could not pull up the EX250 specific bearing but google images of other All Balls bearing kits look like those.  He has already installed the upper race (third pic) which would 'seal' the bearing.  The part in the second picture goes up into the greasy hole in the third picture tube first.  He's already installed the upper race into the frame in the third picture.  When it's all together, it looks like a sealed bearing]
 [[image:IMG_5700.jpg|200px]]
@@ Line 56: / Line 58: @@
 '''<<<Can you leave everything connected to the bars?>>>'''
-[:>Bob  I think All Balls calls those "sealed tapered roller bearings"  I could not pull up the EX250 specific bearing but google images of other All Balls bearing kits look like those.  He has already installed the upper race (third pic) which would 'seal' the bearing.  The part in the second picture goes up into the greasy hole in the third picture tube first.  He's already installed the upper race into the frame in the third picture.  When it's all together, it looks like a sealed bearing]
 * Both handlebars: Make sure the brake reservoir remains in an upright position, to keep air out of the line.