Reducing handlebar and footpeg vibration: Difference between revisions
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
If you still have an unacceptable amount of vibration after you've tried the above stuff, try one or more of these: | If you still have an unacceptable amount of vibration after you've tried the above stuff, try one or more of these: | ||
*'''Bar ends:''' Try using heavier [http://faq.ninja250.org/wiki/Removing_%26_replacing_bar_ends#A_couple_things_to_think_about bar ends]. | *'''Bar ends:''' Try using heavier [http://faq.ninja250.org/wiki/Removing_%26_replacing_bar_ends#A_couple_things_to_think_about bar ends]. | ||
*'''Stock footpegs:''' The stock pegs, with rubber under the foot, are usually less prone to letting vibration pass than are aftermarket all-metal replacements. If you've switched to aluminum pegs, switch back. | *'''Stock footpegs:''' The stock pegs, with rubber under the foot, are usually less prone to letting vibration pass than are aftermarket all-metal replacements. If you've switched to aluminum pegs, switch back. | ||