My brakes are not operating normally: Difference between revisions
No edit summary |
|||
| Line 2: | Line 2: | ||
====There is a pulsing when I apply my brakes.==== | ====There is a pulsing when I apply my brakes.==== | ||
Jack up the front wheel. Spin the wheel and look for rubbing. Apply the front brake ever so slightly to see where it touches first. Mark that part of the wheel. There are 6 allen head bolts holding the front rotor to the wheel. Tighten the two or three bolts | Jack up the front wheel. Spin the wheel and look for rubbing. Apply the front brake ever so slightly to see where it touches first. Mark that part of the wheel. There are 6 allen head bolts holding the front rotor to the wheel. Tighten the two or three bolts closest to the spot on the wheel where the rubbing occurred. | ||
If that doesn't fix it, replace the pads. Still no luck? | If that doesn't fix it, replace the pads. Still no luck? It's time to replace the rotor. You can't machine rotors on a motorcycle like you can on a car. They're too thin. Note that normal rubbing of the rotor by the pads is fine; they're designed to do that. However, if you start to get a pulsating or shaking of the bike (usually the front end) when you hit the brakes, then it's serious. | ||
====My brake pads are grinding.==== | ====My brake pads are grinding.==== | ||