I want to get some new grips: Difference between revisions
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
'''Notes:''' | '''Notes:''' | ||
*The left and right grips do not have the same inner diameter, so don't frustrate yourself trying to get the left-hand grip onto the throttle; it won't fit. The diameter of the bar and grip is smaller on the left side, but the bar end is the same size on both sides. It may difficult to get the grip over the bar end on the left side because the bar end is much larger than the grip. A lot of soap and twisting should do the trick. | *The left and right grips do not have the same inner diameter, so don't frustrate yourself trying to get the left-hand grip onto the throttle; it won't fit. The diameter of the bar and grip is smaller on the left side, but the bar end is the same size on both sides. It may be difficult to get the grip over the bar end on the left side because the bar end is much larger than the grip. A lot of soap and twisting should do the trick. | ||
*A cool trick learned at a dealership many moons ago is to use compressed air and blow it under the grip. Lift up the outboard edge of the grip, and jet some air under there. Working quickly, you can have a grip on or off in seconds, with no residues to worry about. | *A cool trick learned at a dealership many moons ago is to use compressed air and blow it under the grip. Lift up the outboard edge of the grip, and jet some air under there. Working quickly, you can have a grip on or off in seconds, with no residues to worry about. | ||