Ninja250Wiki

Installing a not-exactly-stock shock: Difference between revisions

← Older editNewer edit →
No edit summary
No edit summary
Line 4: Line 4:
*[[GSXR shock notes|See here]] for notes on installing a GSXR shock.
*[[GSXR shock notes|See here]] for notes on installing a GSXR shock.


This article will demonstrate some of the modifications necessary to install a Fox shock with a piggyback reservoir design (the oil reservoir is attached to the top of the shock). The process should be similar with other shocks. ([[Shocks from other bikes|See here]] for instructions on the ZX600 shock). Fewer mods will likely be necessary if you can get a Fox with a remote reservoir.  
This article will demonstrate some of the modifications necessary to install a Fox shock with a piggyback reservoir design (the oil reservoir is attached to the top of the shock). Fewer mods will likely be necessary if you can get a Fox with a remote reservoir.  


This shock is a Fox TC-R from a '99 GSXR750. Right picture shows both shocks. OEM is the wimpy-looking one.  
This shock is a Fox TC-R from a '99 GSXR750. Right picture shows both shocks. OEM is the wimpy-looking one.  
Retrieved from "https://faq.ninja250.net/wiki/Installing_a_not-exactly-stock_shock"