GSXR600 shock: Difference between revisions

No edit summary
No edit summary
Line 2: Line 2:
Here are some notes from a member who put a 2006 GSXR shock on his Ninja. Since this installation will involve a lot of personal choice, tinkering, and fabrication, we'll let [http://www.ninja250.org/Silver Silver] explain his approach.
Here are some notes from a member who put a 2006 GSXR shock on his Ninja. Since this installation will involve a lot of personal choice, tinkering, and fabrication, we'll let [http://www.ninja250.org/Silver Silver] explain his approach.


Please note that if you install a shock with a piggyback (attached;; non-remote) reservoir, you will lose your airbox and have to move the battery box as well.
Please note that if you install a shock with a piggyback (attached, non-remote) reservoir, you will lose your airbox and have to move the battery box as well.


I ordered a 2006 GSXR600 shock, thinking that possibly the reservoir would clear the battery. I have been running an SV650 shock which, though for me it was better than stock, was nowhere near what I was looking for to match up with the .7 Sonic springs and the MT75 tires. The shock was $19.99 off of ebay and shows very, very little wear. I doubt this shock saw 100 miles. At any rate, I found that the res would not clear the bottom of the battery tray. I needed 3/4 of an inch or so to make it happen, and that is what I did. I do get ahead of myself though.  
I ordered a 2006 GSXR600 shock, thinking that possibly the reservoir would clear the battery. I have been running an SV650 shock which, though for me it was better than stock, was nowhere near what I was looking for to match up with the .7 Sonic springs and the MT75 tires. The shock was $19.99 off of ebay and shows very, very little wear. I doubt this shock saw 100 miles. At any rate, I found that the res would not clear the bottom of the battery tray. I needed 3/4 of an inch or so to make it happen, and that is what I did. I do get ahead of myself though.