Installing a battery charger: Difference between revisions
No edit summary |
|||
| Line 72: | Line 72: | ||
Then, insert the bolt into the positive terminal post. You'll find out that the bolt is too short to reach the square nut. The nut falls down when the terminal bolt is loosened. | Then, insert the bolt into the positive terminal post. You'll find out that the bolt is too short to reach the square nut. The nut falls down when the terminal bolt is loosened. | ||
[[image:715852.gif | [[image:715852.gif]] | ||
This is why we removed the side panels, to provide access to the nut from under the frame. Use a flat head screwdriver to 'lift' the nut up high enough to screw the bolt back in all the way. The terminals are made of lead, which is very soft. Don't get carried away with the screwdriver. | This is why we removed the side panels, to provide access to the nut from under the frame. Use a flat head screwdriver to 'lift' the nut up high enough to screw the bolt back in all the way. The terminals are made of lead, which is very soft. Don't get carried away with the screwdriver. | ||