Washers for carb needles: Difference between revisions

Revision as of 10:25, 13 December 2008 view source Bokonon (talk \| contribs) Bureaucrats, Administrators 9,915 edits No edit summary		Revision as of 10:30, 13 December 2008 view source Bokonon (talk \| contribs) Bureaucrats, Administrators 9,915 edits No edit summary Newer edit →
Line 6:		Line 6:
	*thickness = 0.0400" , 1.016mm		*thickness = 0.0400" , 1.016mm

	If you can't find #4 washers, try to get an assortment that is close in dimension. Those with 2.5 - 3mm inside diameter, and not being too much larger than 3/8"/9.5mm should be fine. As always, it's better to get a few more than you need, rather than having to keep going back to the store.		If you can't find #4 washers, try to get an assortment that is close in dimension. Those with 2.5 - 3mm inside diameter, and not being too much larger than 3/8"/9.5mm outside should be fine. As always, it's better to get a few more than you need, rather than having to keep going back to the store.