Servicing the swingarm: Difference between revisions
| Line 41: | Line 41: | ||
[[Image:wheelremoved.jpg|150px]] | [[Image:wheelremoved.jpg|150px]] | ||
3) Remove the nuts from the swingarm pivot (22mm), lower shock mount (19mm) and upper tie rod arms (19mm), but do not remove the bolts or pivot shaft. The easiest way to remove the 19mm nuts is to "lock" them in place with a 19mm open- | 3) Remove the nuts from the swingarm pivot (22mm), lower shock mount (19mm) and upper tie rod arms (19mm), but do not remove the bolts or pivot shaft. The easiest way to remove the 19mm nuts is to "lock" them in place with a 19mm open-end wrench, then spin their corresponding bolt heads with a 17mm socket, extension, and breaker bar (or ratchet + piece of pipe). | ||
[[Image:swingarmclose.jpg|150px]] [[Image:pivotnutremoved.jpg|150px]] | [[Image:swingarmclose.jpg|150px]] [[Image:pivotnutremoved.jpg|150px]] | ||