Changing the front reflectors to running lights: Difference between revisions
No edit summary |
|||
| Line 16: | Line 16: | ||
Tap into the wire using crimp connectors and [http://faq.ninja250.org/wiki/Installing_connectors_for_your_wiring#Using_heat_shrink_tubing_to_cover_exposed_wire heat shrink tubing]. Then, run a wire to each new running light bulb. You should use bullet connectors, as you'll need to be able to unhook the wires to remove the fairing. | Tap into the wire using crimp connectors and [http://faq.ninja250.org/wiki/Installing_connectors_for_your_wiring#Using_heat_shrink_tubing_to_cover_exposed_wire heat shrink tubing]. Then, run a wire to each new running light bulb. You should use bullet connectors, as you'll need to be able to unhook the wires to remove the fairing. | ||
[[image:drl-10.jpg|150px]] | |||
[[Image:Crimp connectors.jpg|100px]] | [[Image:Crimp connectors.jpg|100px]] | ||
| Line 26: | Line 28: | ||
[[image:Signal_5 edit.jpg|150px]] | [[image:Signal_5 edit.jpg|150px]] | ||
[[image:Signal_7 edit.jpg|80px]] | [[image:Signal_7 edit.jpg|80px]] | ||
====Making a ground wire==== | ====Making a ground wire==== | ||