Cleaning the carbs 2: Difference between revisions
No edit summary |
No edit summary |
||
| Line 51: | Line 51: | ||
*You can reach the main jet more easily than the pilot, but they have the same sized screwdriver slot. This makes it a good candidate for figuring out what tool to use on the pilot. | *You can reach the main jet more easily than the pilot, but they have the same sized screwdriver slot. This makes it a good candidate for figuring out what tool to use on the pilot. | ||
*You need to hold the emulsion tube still with a wrench in order to get the jet out of it. | *You need to hold the emulsion tube still with a wrench in order to get the jet out of it. | ||
*Remove the emulsion tube and look through the holes in the sides of the emulsion tube against sunlight to make sure they are clean. | *Remove the emulsion tube and look through the holes in the sides of the emulsion tube against sunlight to make sure they are clean. Clean the same as the pilot jets below. | ||
*When reinstalling the emulsion tube, not all the threads will be hidden in the carb body. That is normal; do not over-tighten. | |||
====Cleaning==== | ====Cleaning==== | ||