Servicing the swingarm: Difference between revisions
No edit summary |
No edit summary |
||
| Line 91: | Line 91: | ||
16) Tighten the pivot shaft nut to 65 ft-lbs/88 N-m. Tighten the lower shock bolt and tie rod bolts to 33 ft-lbs/44 N-m. | 16) Tighten the pivot shaft nut to 65 ft-lbs/88 N-m. Tighten the lower shock bolt and tie rod bolts to 33 ft-lbs/44 N-m. | ||
17) Reinstall the rear wheel, being sure to [[How do I adjust chain/rear wheel alignment?|align the sprockets]], [[How do I measure chain slack?|adjust the chain slack]] and [[Torque Values|torque all fasteners]] to the proper specs. You might as well [[How do I clean the drivechain?|clean]] and [[How often should I lube the chain; what should I use to do so?|lube]] the chain while you're there, too. | 17) [http://faq.ninja250.org/wiki/Mounting_%26_balancing_tires_yourself#Reattaching_the_wheel Reinstall the rear wheel], being sure to [[How do I adjust chain/rear wheel alignment?|align the sprockets]], [[How do I measure chain slack?|adjust the chain slack]] and [[Torque Values|torque all fasteners]] to the proper specs. You might as well [[How do I clean the drivechain?|clean]] and [[How often should I lube the chain; what should I use to do so?|lube]] the chain while you're there, too. | ||
18) Reinstall the mufflers | 18) Reinstall the mufflers | ||
19) Test Ride with a smile of satisfaction | 19) Test Ride with a smile of satisfaction | ||