Removing & replacing bar ends: Difference between revisions
No edit summary |
|||
| Line 20: | Line 20: | ||
:Get a 1/4" cobalt drill bit (or any kind of bit designed for drilling in metal) from any hardware store, and drill straight through the head. The head will pop off and the bar end will slide right off. | :Get a 1/4" cobalt drill bit (or any kind of bit designed for drilling in metal) from any hardware store, and drill straight through the head. The head will pop off and the bar end will slide right off. | ||
:[[image:drill bolt head.jpg| | :[[image:drill bolt head.jpg|100px]] | ||
From there, clamp a vise-grips onto the remaining part of the bolt and turn it out, perhaps using one of the heat methods below to assist. | From there, clamp a vise-grips onto the remaining part of the bolt and turn it out, perhaps using one of the heat methods below to assist. | ||