Reinstalling the front wheel: Difference between revisions

Line 4:

First, take careful note of the bits and pieces that come off when you pull out the axle: axle, right-side spacer, speedo drive, washer, crown nut and cotter pin. Reassemble it all in the same order.

The first problem occurs while ensuring that the speedo drive '''((gear???))''' meshes with the teeth in the wheel. You have to line up the notches in the wheel with the notches on the speedo drive. Get those inner notches lined up, then spin the wheel a tad to line up the notches on the fork and speedo (see below). This parts diagram shows the two pieces that need to fit together (circled). The ~~notches~~ on the ~~part on the wheel need to have the raised portion~~ (~~it's~~ barely visible in the ~~photo~~) on the ~~speedo gear in them~~.

The first problem occurs while ensuring that the speedo drive '''((gear???))''' meshes with the teeth in the wheel. You have to line up the notches in the wheel with the notches on the speedo drive '''((gear???))'''. Get those inner notches lined up, then spin the wheel a tad to line up the notches on the fork and speedo (see below). This parts diagram shows the two pieces that need to fit together (circled). The raised portion on the speedo gear (barely visible in the diagram) needs to go in the notches on the part on the wheel.

[[image:speedo gear.bmp|150px]]

@@ Line 4: / Line 4: @@
 First, take careful note of the bits and pieces that come off when you pull out the axle: axle, right-side spacer, speedo drive, washer, crown nut and cotter pin. Reassemble it all in the same order.
-The first problem occurs while ensuring that the speedo drive '''((gear???))''' meshes with the teeth in the wheel. You have to line up the notches in the wheel with the notches on the speedo drive. Get those inner notches lined up, then spin the wheel a tad to line up the notches on the fork and speedo (see below). This parts diagram shows the two pieces that need to fit together (circled). The notches on the part on the wheel need to have the raised portion (it's barely visible in the photo) on the speedo gear in them.
+The first problem occurs while ensuring that the speedo drive '''((gear???))''' meshes with the teeth in the wheel. You have to line up the notches in the wheel with the notches on the speedo drive '''((gear???))'''. Get those inner notches lined up, then spin the wheel a tad to line up the notches on the fork and speedo (see below). This parts diagram shows the two pieces that need to fit together (circled). The raised portion on the speedo gear (barely visible in the diagram) needs to go in the notches on the part on the wheel.
 [[image:speedo gear.bmp|150px]]